PRG Gear > Equipment Rentals > Projection > Projectors > Panasonic PT-RZ31K DLP Laser Projector

Panasonic PT-RZ31K DLP Laser Projector

Product Details

The evolution of 3-Chip DLP™ SOLID SHINE Laser culminates in the PT-RZ31K Series, a flagship forged by end-user experience with 31,000-lumen (Center/High Mode)*1 of brightness for rental/staging events. Convenient on-site rigging and dust-resistant optics push service-free projection beyond 20,000 hours*2 in Normal Mode for permanent installations. In every detail, these flagships make elite performance last longer.

Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness. Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.

3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors. Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.

Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.

Manufacturer Specs

Projector Technology: 3 x DLP
Horizontal resolution: 1920 Pixel
Vertical resolution: 1200 Pixel
Chip size: 0,96 ”
Aspect ratio: 16:10
Brightness (ANSI): 30000 lm
Brightness (Center): 31000 lm
Contrast:  20000 : 1
Lamp system:  Laser Phosphor
Lens shift vertical:  110 %
Lens shift horizontal:  40 %
Lens type:  ET-D75
3D-ability:  yes
Supported 3D standards: frame sequential, passive, top, bottom, side by side
Additional features: edge blending, 360° x 360° Installation, High Frame Rate
Noise level:  49 dB(A)
Power consumption:  2.870,00 W

Inputs and Outputs

Number of DVI inputs: 1
Number of HDMI inputs: 1
Number of SDI inputs: 2
Supported DVI standards: single link DVI up to 165 MHZ
DVI-D
Supported HDMI standards: HDMI 1.4
Supported SDI standardsSMPTE 372M / dual HD-SDI / 1080p
SMPTE 425M / 3G-LvB(DL)-SDI / 1080p(50/60)
SMPTE 425M / 3G-LvA-SDI / 1080p(50/60)

Control

Remote interface:  remote control, RJ45 / LAN, 3,5mm phone jack, RJ45 serial 232
Operating interface: front panel, web GUI, infrared remote control , separate software

Technical Tools

rz31k_manual_en
Product Details

The evolution of 3-Chip DLP™ SOLID SHINE Laser culminates in the PT-RZ31K Series, a flagship forged by end-user experience with 31,000-lumen (Center/High Mode)*1 of brightness for rental/staging events. Convenient on-site rigging and dust-resistant optics push service-free projection beyond 20,000 hours*2 in Normal Mode for permanent installations. In every detail, these flagships make elite performance last longer.

Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness. Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.

3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors. Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.

Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.

Manufacturer Specs

Projector Technology: 3 x DLP
Horizontal resolution: 1920 Pixel
Vertical resolution: 1200 Pixel
Chip size: 0,96 ”
Aspect ratio: 16:10
Brightness (ANSI): 30000 lm
Brightness (Center): 31000 lm
Contrast:  20000 : 1
Lamp system:  Laser Phosphor
Lens shift vertical:  110 %
Lens shift horizontal:  40 %
Lens type:  ET-D75
3D-ability:  yes
Supported 3D standards: frame sequential, passive, top, bottom, side by side
Additional features: edge blending, 360° x 360° Installation, High Frame Rate
Noise level:  49 dB(A)
Power consumption:  2.870,00 W

Inputs and Outputs

Number of DVI inputs: 1
Number of HDMI inputs: 1
Number of SDI inputs: 2
Supported DVI standards: single link DVI up to 165 MHZ
DVI-D
Supported HDMI standards: HDMI 1.4
Supported SDI standardsSMPTE 372M / dual HD-SDI / 1080p
SMPTE 425M / 3G-LvB(DL)-SDI / 1080p(50/60)
SMPTE 425M / 3G-LvA-SDI / 1080p(50/60)

Control

Remote interface:  remote control, RJ45 / LAN, 3,5mm phone jack, RJ45 serial 232
Operating interface: front panel, web GUI, infrared remote control , separate software